Millennium Machinery

Description

Leading screw lathes with feed gear for the demanding user. TU 2807V with brushless motor for stepless speed control

  • Precise processing
  • Powerful, maintenance-free engine
  • Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
  • Smooth-running feed gear with rounded gears running in an oil bath
  • Hardened and ground Z-axis guideway
  • Guaranteed concentricity of the spindle nose better than 0.009 mm
  • Concentricity on the lathe chuck better than 0.04 mm
  • Automatic longitudinal / lead screw drive
  • Lead screw for thread cutting or automatic longitudinal turning
  • Quadruple tool holder
  • All guides can be adjusted by wedge strips
  • Right / left rotation in the control panel switchable
  • Hardened main spindle mounted in adjustable precision tapered roller bearings
  • Tapered roller bearings in P5 quality
  • Hardened spindle nose with Ø 26 mm spindle bore
  • Rolled trapezoid spindles
  • Chip protection on the upper slide
  • Upper slide on cross slide slidable
  • Tailstock for taper turning ± 5 mm adjustable
  • Tailstock quill and handwheel with adjustable fine scale 0.02 mm
  • Fast, easy and tool-free adjustment by means of a clamping lever
  • Leadscrew stored in two sintered bearings
  • Change gear set in standard scope of supply for thread cutting
  • Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
  • thrust bearing
  • 3-jaw lathe chuck in the standard scope of delivery
  • Emergency stop impact switch
  • Fully equipped, allowing the user to be productive immediately after commissioning

TU 2807V

  • Quiet, powerful and brushless DC drive with excellent control characteristics
  • High precision steel lining for higher speeds
  • Speed change easily adjustable via potentiometer
  • Digital speed display
Send Enquiry
SKU 3427001 Categories ,

Technical Specifications

Connection 230 V / 1 Ph ~50 Hz
Driving motor spindle 850 W
Spindle taper MT 4
Spindle hole
Spindle seat Short taper
Quadruple tool holder Height max. 13.5 mm
Centre height 140 mm
Centre width 700 mm
Turning Ø over lathe bed 266 mm
Bed width 180 mm
Spindle speed 150 – 2,000 min-1
Number of steps 6 steps
Travel top slide 60 mm
Travel cross slide 160 mm
Longitudinal feed in the range of 0.07 – 0.4 mm/U
Pitch – Metric in the range of 0.2 – 3.5 mm/U
Pitch – Inch in the range of 56 – 8 Gg/1
Tailstock seat MT 2
Tailstock – sleeve travel 85 mm
Dimensions (L x W x H) 1,370 x 640 x 535 mm
Net weight 180 kg






    I consent to have this website store my submitted information so they can respond to my inquiry.

    Call Now Button