Millennium Machinery

MTBS 1540-40 T


Motorized sheet metal shears with NC-controlled backgauge

  • Thin sheets are supported in order to be able to apply dimensionally to the backgauge
  • pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
  • Operator can choose if the section falls into the back room or the operator side
  • Powerful drive via gearbox-supported motor and massive chain
  • Backscan guided on round shafts 750 mm driven by ball screws
  • Positioning control of back gauge Maper HT071 with digital dimension display
  • heavy and robust steel construction in welded construction
  • constant, low cutting angle for optimum cutting results
  • Control panel on the left side of the machine Side stop 1.000 mm with scale and T-slot
  • 2 material support arms 500 mm with T-slot
  • Balls in the support table for easier material transport
  • Cutting gap adjustment with ratchet wrench and vernier ring
  • high quality knife (also suitable for stainless steel)
  • Cutting edge LED lighting with silhouette
  • Rear room safety with side plates and light barrier
  • continuous finger protection device
  • mobile foot pedal with EMERGENCY STOP switch
  • All moving parts are stored with low maintenance
  • Electrics from “Siemens” and “Schneider”

Optional accessories:

  • Extension of the backgauge from 750 mm to 1,000 mm
  • Miter fence Adjustable, removable miter fence for angles from 0 ° -180 °
  • Manual central lubrication

  • Mobile sheet metal tray : Mobile tray for the rear space of the machine. Maximum load 300 kg
Send Enquiry
SKU 3815615 Categories ,

Technical specifications

Length (product) approx. 2320 mm
Width / depth (product) approx. 2360 mm
Height (product) approx. 1280 mm
Weight (net) approx. 2240 kg
Recording power drive motor 6.27 kW
Output power drive motor 5.5 kW
Total connection value 6.8 kW
Total current consumption 12.45 a
Nominal mode drive motor S1
Duty cycle drive motor 100%
Electrical voltage 400V
Phase (s) 3
Current Type ~
power frequency 50 Hz
Cutting length max. 1540 mm
Cutting performance at material tensile strength 400 N / mm² 4 mm
Cutting performance at material tensile strength 450 N / mm² 4 mm
Cutting performance at material tensile strength 700 N / mm² 2.5 mm
cutting speed 90 m / min
Backgauge adjustment range up to 750 mm
Backgauge speed 28 mm / s
Engine power backgauge 0.37 kW
Side stop length 1000 mm
cutting angle
Strokes max. at full cutting length 40 1 / min
Sheet metal low number 2
Cutting gap adjustment min. 0.05 mm
Cutting gap adjustment max. 0.4 mm
Table length 1718 mm
Table depth 530 mm
Table height 860 mm
Deep machine body 870 mm

I consent to have this website store my submitted information so they can respond to my inquiry.

Call Now Button