Fully equipped mechanic lathes. TH 3610D with Digital Readout System DPA 21
Hardened and ground Z-axis guideway
Spindle mount Camlock DIN ISO 702-2 No. 5
Guaranteed concentricity of the spindle nose better than 0.015 mm
Gears and shafts hardened and ground,
running in an oil bath in precision bearings
Motor protection switch, lockable main switch
Right / left rotation on bed sled switchable
leading spindle
Machine base with tool pockets
Emergency stop device with foot control
Safety handwheels with release function in the X and Z axis

TH 3610D:

Room amenities:

Switch cabinet

Main spindle

Carriage

LED machine light

Bed

Tailstock

Substructure

Chip pan

Switch

Right-left switch

Handwheels

Length (product)	1,930 mm
Width / depth (product)	725 mm
Height (product)	1,620 mm
Weight (net)	610 kg
Power drive motor	1.5 kW
Electrical voltage	400V
Phase (s)	3 Ph
Current Type	~
power frequency	50 Hz
Spindle taper	Camlock DIN ISO 702-2 No. 5
Spindle bore / rod diameter	52mm
Centre height	180 mm
distance between centres	980 mm
Circumferential diameter over machine bed	356 mm
Circumference diameter in the bed bridge	516 mm
Turning length in the bed bridge	160 mm
bed width	187 mm
Speed range	70 – 2,000 min-1
Number of speed ranges	8 steps
Travel X-axis	100 mm
Travel Y-axis	170 mm
Tailstock	MT 3
Tailstock quill stroke	120 mm
Tailstock quill diameter	42mm
Spindle taper	MT 6
Steel holder pick-up height max.	16 mm
Feed area along	0.052 – 1.392 mm / rev
Number of feeds along	32
Feed area flat	0.014 – 0.38 mm / rev
Number of feeds plan	32
Gradient Metric	0.4 – 7 mm / rev
Number of slopes Metric	26
Gradient inches	56 – 4 Gg / in.
Number of slopes inches	34

Centre Lathe - OPTIturn TH 3610D (400v)