OPTIturn TZ 5216DP

Description

  • PREMIUM center lathe with digital position indicator DP700 from Newall
  • Machine bed and base made of heavily ribbed special cast iron
  • High stiffness of the headstock housing due to heavily ribbed 25GG casting
  • Hardened and ground spindle ensures tremendous accuracy and durability
  • Due to high chip removal during roughing, the finest surfaces can be produced and the tightest tolerances can be maintained
  • Large range of threads and feeds, without having to change the gears in the Wechselradschere must be made
  • Bed guides hardened and precision ground
  • Perfectly running main spindle mounted in precision ball bearings
  • Mechanical longitudinal feed shutdown of the bed carriage with four adjustable eccentrics
  • Electronic brake of the main spindle
  • All control elements (electrical) to reach centrally
  • 4-fold longitudinal stop
  • Spindle bore 80 mm
  • Rapid traverse X- and Z-axis with automatic end stop in the Z-axis

Digital Position Display DP700

  • 2 measuring strips Microsyn
  • 1 measuring strip Spherosyn
  • User interface is intuitive and user-friendly
  • Developed and manufactured in England
  • IP67 protection
  • Measuring strips insensitive to contamination in the workshop
  • 5-year warranty on display and reading heads

Room amenities:

feed gear

  • All gears made of steel
  • hardened and ground
  • Waves on needle bearings
  • all components are lubricated in an oil bath

lock case

  • Housing completely sealed
  • With safety device against simultaneous operation of threading and feed mechanism

main spindle

  • Perfectly round
  • High load capacity
  • Mounted in precision tapered roller bearings

machine lamp

  • Complete illumination of the workspace

Floating Joints

  • standard

tailstock

  • hardened and ground quill
  • Generously dimensioned
  • Quill with scale

prism bed

  • heavily ribbed special casting
  • great rigidity

PREMIUMline Made in EU

European Quality

Compare

Description

Technical Specifications

Connection 400 V / 3 Ph ~ 50 Hz
Total connected value 6.1 kW
Power drive motor 5.5 kW
spindle taper MK5
Spindle taper Camlock DIN ISO 702-2 No. 8
Spindle bore, rod passage 80 mm
Performance of the coolant pump 60W
Center height 260 mm
distance between centers 1,625 mm
Circulation Ø over machine bed 530 mm
Circulation Ø in the bed bridge 780 mm
Circulation-Ø over longitudinal slide 475 mm
Circulation-Ø over cross slide 325 mm
Turning length in the bed bridge 215 mm
bed width 350 mm
Spindle speed 30 – 1,500 min-1
number of steps 12 steps
Traverse carriage 165 mm
Traverse cross slide 355 mm
Longitudinal feed in the area 0.05 – 1.5 mm / rev
Schedule feed in the area 0,025 – 0,75 mm / rev
Thread pitch – metric 0,5 – 15 mm / rev
Gradient – inches in area 60 – 2 Gg / 1
Diametral pitch in the field 4 – 120 DP
Module thread in the area 0.25 – 7.5 MP
Tailstock MK 5
Tailstock – Pinole diameter 72 mm
Tailstock – quill stroke 180 mm
length x WIDTH X HEIGHT 2,980 x 1,060 x 1,730 mm
net weight 1,795 kg