OPTIturn S 600

Description

  • Optimum Premium Slant Bed Lathe: Speed, performance, precision and durability
  • Difficult execution
  • Compact design
  • Inclined bed design 30 ° for particularly large machining diameter
  • Slight chip discharge into the chip tray
  • Dimensionally stable linear guides – ensure a long service life for maximum static and dynamic rigidity
  • Hardened and ground ball screws
  • SIEMENS servomotors for spindle, X and Z axis
  • All servomotors with integrated encoder for highest accuracy
  • Device for manual tool measurement
  • Tailstock with hydraulic quill
  • Portable electronic handwheel makes it much easier to retract programs
  • chip conveyor
  • chip cart
  • Halogen work light
  • Two years SIEMENS warranty included
  • Siemens control SINUMERIK 828D Basic T

Included:

  • Safety Integrated
  • Remaining material detection and processing
  • ShopTurn machining step programming
  • 3-D simulation
  • Simultaneous recording

Room amenities:

machine bed

  • Heavily ribbed
  • 30 degree tilt
  • high rigidity and durability

Components and castings

  • ensure rigidity

machine feet

  • 6 pieces
  • Optimal alignment of the machine

cast body

  • Hardened HRC48-52 and heat treated

linear guide

  • Maximum feed rate

tailstock

    • Hydraulic quill stroke 50 mm
    • for a quick processing

 

tool turret

  • 12 tool slots
  • Hydraulic (LS 200)
  • Take-up height max. 25 mm
  • Recording diameter 32 mm

Coolant and  lubricant separator

  • separates the lubricant from the coolant

hydraulic power unit

  • for chucking lathe chuck, tool turret and tailstock quill
  • Security check valve
  • Motor power 1.5 kW
  • Tank capacity 60 liters

Tool probe

  • from Renishaw
  • enables the measuring of tools within the machine

Automatic lubrication system

  • Fold out for easy filling
  • Float switch detects the amount of oil. If the oil level is too low, an acoustic signal will sound, preventing damage to the machine

Compare
Categories: , ,

Description

Technical Specifications

Electrical connection 400 V / 3 Ph ~ 50 Hz
Power consumption 25 kW
drive motor 12 kW
Torque drive motor 115 Nm
Spindle taper DIN ISO 702-1 No. 6
spindle hole 75 mm * other spindle bores and spindle speeds on request
Performance of the coolant pump 750 W
Power of the cleaning pump 750 W
tank capacity 140 liters
Hydraulic system engine power 1.5 kW
tank capacity 60 liters
Turning length max. 460 mm
Turning Ø max. 500 mm
Circulation-Ø over cross slide 210 mm
Circulation Ø over machine bed 500 mm
inclined bed 30 degrees
Hydraulic Chucks 215 mm
Feed passage 65 mm ** depending on the built-in lathe chuck
Spindle speeds 10 – 4.000 min-1 * other spindle bores and spindle speeds on request
Tool turret – hydraulic type LS 200
Number of tool slots 12
Pick-up height, width square max 25 x 25 mm
Pick-up diameter boring bar max. 32 mm
repeatability +/- 0.005 mm
positioning +/- 0.005 mm
Travel X-axis 215 mm
Traverse Z-axis 520 mm
Feedrate X- / Z-axis 30,000 mm / min
Torque motor X- / Z-axis 11 Nm
Tailstock MK 4
traverse 425 mm
Tailstock – Pinole diameter 65 mm
Tailstock – quill stroke hyraulic 50 mm
Dimensions LxWxH 2,322 x 1,948 x 1,930 mm
total weight 3,070 kg