OPTIturn L 28HS SINUMERIK 808D ADVANCED

Description

CNC-controlled flatbed lathe with linear guide

  • Braced machine bed made of gray cast iron
  • Elaborate spindle bearing
  • Emergency stop impact switch
  • Central lubrication
  • reference switch
  • Maintenance-friendly protective housing
  • Rear access door for maintenance
  • Safety switch on the front sliding door
  • Revolving revolver is behind the center of rotation (left-hand turning tool)
  • linear guide
  • Software package “SINUMERIK 808D on PC” included. (Practical training software so that workpieces can be programmed and simulated offline on the PC.) Download it for free at www.cnc4you.com
  • Two years SIEMENS warranty

Room amenities:

tool turret

  • For 6 tool slots
  • 1.5 seconds (600)
  • 60 watts

spindle

  • Incremental encoder for spindle positioning (thread cutting)
  • Large spindle bore

signal light

  • Visually indicates the state of the machine

Coolant system

  • extractable
  • Light chip removal

linear guide

  • High permissible load and high rigidity
  • Low coefficient of friction

Central lubrication system

  • Ensures regular and automatic lubrication
  • Lubrication points which are connected to the central lubrication system have a longer service life

Siemens controller

SINUMERIK 808D ADVANCED PPU 150

  • Siemens servo drives and motors in all axes
  • Closed loop
  • Network Function
  • RJ45 Ethernet port
  • 8.4 “LCD color display with 800×600 resolution
  • Prepared for remote maintenance
  • AST function; enables easy optimization with higher demands on dynamics and accuracy
  • Higher accuracy
  • Incremental encoder. Homing required

Compare
Categories: , ,

Description

Technical Specifications

Electrical connection 400 V / 3 Ph ~ 50 Hz
Total consumption 3.75 kVA
Drive motor S1 operation 2.2 kW
Torque drive motor S1 operation 14 Nm
Torque at the spindle 28 Nm
Spindle taper DIN 6350 A2-3
spindle taper 5C
spindle hole 30 mm
Performance of the coolant pump 95 W
tank capacity 25 l
Center height 169 mm
distance between centers 430 mm
Circumferential diameter over cross slide 200 mm
Circumferential diameter over machine bed 300 mm
Spindle speeds 40 – 4000 min-1
Tool turret type electrical
Number of tool slots 6 tools
Pick-up height, width square max. 16 mm
Pick-up diameter boring bar max. 16 mm
repeatability
positioning
Travel X-axis 145 mm
Traverse Z-axis 465 mm
Feedrate X-axis 10000 mm / min
Feed rate Z-axis 12000 mm / min
Torque motor X-axis 1.3 Nm
Torque motor Z axis 2.4 Nm
Tailstock MK 2
Tailstock – Pinole diameter 30 mm
Tailstock – quill stroke 120 mm
length 1655 mm
width 1590 mm
height 1955 mm
total weight 900 kg