Milling Machines

View as:
  • OPTImill MF 4-B

    Description

    • Multifunctional drilling and milling machines for professional use. Mechanically steplessly adjustable drive
    • Heavy, solid design made of high-quality Meehanite casting
    • High concentricity due to tapered roller bearing, measured smaller than 0.01 mm in the quill
    • Automatic quill feed
    • Right / left rotation for thread cutting
    • X- and Z-axis with adjustable 55 ° dovetail guide
    • Y-axis with flat guide
    • Coolant system
    • Right and left rotation
    • Automatic quill feed, 3-stage 0.04 – 0.15 mm / rev
    • Precision micro feed
    • Milling spindle with precision bearing
    • Mechanical spindle brake
    • Drilling depth scale and stroke
    • Smooth-running, precise cross table with T-slots and coolant channel
    • Motor feed in the X, Y and Z axes
    • Integrated digital position indicator DPA 2000
    • Swiveling arm with integrated control panel
    • Central lubrication

    MF 4V-B:

    • Load capacity cross table 300 kg
    • Large travel: X / Y / Z axis automatically 820 mm / 320 mm / 340 mm

    Room amenities

    • control panel
      • Integrated control panel
      • Integrated digital position indicator DPA 2000 with speed display
    • Drill-mill head
      • Tiltable ± 45 °
    • Spindle speeds
      • Stepless speed control
      • Especially large speed range
    • depth stop
      • Adjustable with millimeter scale
      • Front readable
    • windscreen
      • adjustable height
      • Large dimensions
    • cross table
      • Solid
      • Large dimensions
      • Precise surface finish
      • Motorized table height adjustment Z-axis
      • Adjustable end stops
    • Y and Z axis
      • Motorized table feed
    • X axis
      • Motorized table feed
      • Stepless speed control
      • Rapid
      • Forward / reverse operation
    Read more
    Compare
  • OPTImill MF 2-B

    Description

    • Multifunctional drilling and milling machines for professional use. Mechanically steplessly adjustable drive
    • Heavy, solid design made of high-quality Meehanite casting
    • High concentricity due to tapered roller bearing, measured smaller than 0.01 mm in the quill
    • Automatic quill feed
    • Right / left rotation for thread cutting
    • X- and Z-axis with adjustable 55 ° dovetail guide
    • Y-axis with flat guide
    • Coolant system
    • Right and left rotation
    • Automatic quill feed, 3-stage 0.04 – 0.15 mm / rev
    • Precision micro feed
    • Milling spindle with precision bearing
    • Mechanical spindle brake
    • Drilling depth scale and stroke
    • Smooth-running, precise cross table with T-slots and coolant channel
    • Motor feed in the X, Y and Z axes
    • Integrated digital position indicator DPA 2000
    • Swiveling arm with integrated control panel
    • Central lubrication

    MF 4V-B:

    • Load capacity cross table 300 kg
    • Large travel: X / Y / Z axis automatically 820 mm / 320 mm / 340 mm

    Room amenities

    • control panel
      • Integrated control panel
      • Integrated digital position indicator DPA 2000 with speed display
    • Drill-mill head
      • Tiltable ± 45 °
    • Spindle speeds
      • Stepless speed control
      • Especially large speed range
    • depth stop
      • Adjustable with millimeter scale
      • Front readable
    • windscreen
      • adjustable height
      • Large dimensions
    • cross table
      • Solid
      • Large dimensions
      • Precise surface finish
      • Motorized table height adjustment Z-axis
      • Adjustable end stops
    • Y and Z axis
      • Motorized table feed
    • X axis
      • Motorized table feed
      • Stepless speed control
      • Rapid
      • Forward / reverse operation
    Read more
    Compare
  • OPTImill MB 4PV

    Description

    Universal drilling-milling machine with position display and machine base made of cast iron.

    MB 4PV with speed adjustable drive

    • Very smooth running due to ground oil-quenched gear wheels
    • Two-stage quality electrical motor (MB 4P)
    • One-stage quality electrical motor (MB 4PV)
    • Automatic spindle sleeve feed with manual fine feed
    • Motor positioning to the Z axis
    • Gear head slewable by ± 60°
    • Drilling / Thread cutting function

    Equipment details

    Safety screen

    • Height-adjustable
    • Largely dimensioned
    • Micro switch

    X axis

    • With motor driven table feed as standard
    • Infinitely variable speed control
    • Rapid feed
    • Right-hand/left-hand rotation

    Cross table

    • Massive, accurate and largely dimensioned
    • Precisely machined surface
    • Including T-slots
    • Adjustable V-ledges
    • Incorporated length measurement scale
    • Adjustable limit stops

    Spindle sleeve feed

    • Automatic

    Spindle sleeve fine feed

    • Handwheel
    • Easy-to-operate

    Coolant equipment

    Column

    • Massive dovetail guide
    • Manually scraped
    • Highest stability
    • Largest possible precision

    Machine base

    • Massive cast pillar
    • Chip tray

    OPTIOperating panel

    • With integrated control panel to control:
    • Z axis height adjustment
    • Operating mode milling/threading
    • Step switch drive
    • Spindle rotation
    • Luminaire machine
    • Cooling pump
    • Emergency-stop push button
    • Integrated, compact, digital 3-axis positioning display DRO (X – Y – Z) with user-friendly menu guidance and three- or four-row five-segment display

    MB 4P

    • with DRO 3

    MB 4PV

    • with DRO 5 incl. speed display

    The milling machine (frequency converter) MB 4PV corresponds to the standard
    DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare
  • OPTImill MB 4P

    Description

    Universal drilling-milling machine with position display and machine base made of cast iron.

    MB 4PV with speed adjustable drive

    • Very smooth running due to ground oil-quenched gear wheels
    • Two-stage quality electrical motor (MB 4P)
    • One-stage quality electrical motor (MB 4PV)
    • Automatic spindle sleeve feed with manual fine feed
    • Motor positioning to the Z axis
    • Gear head slewable by ± 60°
    • Drilling / Thread cutting function

    Equipment details

    Safety screen

    • Height-adjustable
    • Largely dimensioned
    • Micro switch

    X axis

    • With motor driven table feed as standard
    • Infinitely variable speed control
    • Rapid feed
    • Right-hand/left-hand rotation

    Cross table

    • Massive, accurate and largely dimensioned
    • Precisely machined surface
    • Including T-slots
    • Adjustable V-ledges
    • Incorporated length measurement scale
    • Adjustable limit stops

    Spindle sleeve feed

    • Automatic

    Spindle sleeve fine feed

    • Handwheel
    • Easy-to-operate

    Coolant equipment

    Column

    • Massive dovetail guide
    • Manually scraped
    • Highest stability
    • Largest possible precision

    Machine base

    • Massive cast pillar
    • Chip tray

    OPTIOperating panel

    • With integrated control panel to control:
    • Z axis height adjustment
    • Operating mode milling/threading
    • Step switch drive
    • Spindle rotation
    • Luminaire machine
    • Cooling pump
    • Emergency-stop push button
    • Integrated, compact, digital 3-axis positioning display DRO (X – Y – Z) with user-friendly menu guidance and three- or four-row five-segment display

    MB 4P

    • with DRO 3

    MB 4PV

    • with DRO 5 incl. speed display

    The milling machine (frequency converter) MB 4PV corresponds to the standard
    DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare
  • OPTImill BF 46Vario

    Description

    Universal precision drilling-milling machine with a powerful OPTIMUM Brushlessdrive, infinitely variable speed.

    • Heavy, stable and solid column, made of high quality cast iron with ground and scraped dovetail guideway, provides for high stability and optimum precision
    • High true running accuracy due to taper roller bearings, better than 0.015 mm measured in the spindle sleeve
    • Gear head slewable by 90°
    • Manual fine feed
    • Lamella protective cover of the Z column made of stainless steel
    • Infinitely variable drive
    • Optional massive, heavy steel base provides for stability
    • Drilling depth stop
    • Thread cutting mode and automatic mode
    • CNC prepared (special spindle bearing of the axis and mounting option of the Y-axis housing from the rear side)
    • Height-adjustable protective screen with micro switch providing maximum protection of the user against chips and parts flying off at high speed
    • Low-priced and stable value

    Operating mode “auto”

    • The motor is starting up automatically after moving the lever
    • Stops again in the initial position
    • It is not necessary to actuate the push button start and stop repeatedly for repeated drilling tasks

    Operating mode “Threading”

    • The engine is being activated by moving the spindle sleeve lever downward
    • The direction of rotation is changed by pressing the limit switch on the adjustable drilling depth stop

    Control panel

    • Digital speed display
    • Emergency-stop push button
    • Selector switch operating mode/rotating direction
    • Potentiometer

    Central lubrication

    • for spindle, screw nut and guideways

    Powerful Brushless drive

    • New Brushless controller
    • Optimized running performance, especially smooth running
    • Higher power output (2.2 kW)
    • Signals are digitally processed
    • Nearly constant torque over the entire speed range

    Depth gauge

    • Digital
    • Accuracy of the display 0.01 mm
    • Reversible mm/inch

    Spindle sleeve feed

    • Via spindle sleeve lever (drilling)
    • Coupling to switch-over from manual rough feed to manual fine feed
    • Handwheel for spindle sleeve fine feed

    Column

    • Massive dovetail guide
    • Highest stability and optimum precision

    Cross table

    • Massive, accurate and largely dimensioned
    • Precisely machined surface
    • Adjustable V-ledges
    • Adjustable via 3 handwheels
    • Incorporated length measurement scale
    • Adjustable limit stops

    Optional steel base frame

    • Dimensions L x W x H: 750 (max. 1’235) x 750 x 750 mm
    • Item No. 3353005

    The milling machine (frequency converter) corresponds to the standard DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare
  • OPTImill MB 4

    Read more
    Compare
  • OPTImill F 40 E

    description

    • Heavy, massive cast execution
    • Adjustable wedges
    • Very high speed range from 95 – 3.200 min-1
    • Smooth running thanks to ground gear wheels, running in oil bath
    • Right-left rotation for thread cutting
    • dovetail guide
    • Gear head 60 ° swiveling
    • Emergency stop impact switch
    • Solid gray cast iron base provides stability and absorbs vibrations
    Read more
    Compare
  • OPTImill BF 30Vario – MK 3 recording

    Description

    Precision drilling-milling machine with OPTIMUM Brushless drive and infinitely variable speed control

    • Heavy, stable and solid column, made of high quality cast iron with ground and scraped dovetail guideway, provides for high stability and optimum precision
    • Solid, precise milling table, largely dimensioned and precisely machined surface
    • High true running accuracy due to taper roller bearings, better than 0.015 mm measured in the spindle sleeve
    • Gear head slewable by ± 90°
    • Manual fine feed
    • Adjustable V-ledges
    • Very wide speed range
    • Infinitely variable drive
    • CNC prepared (special spindle bearing of the axis and mounting option of the Y-axis housing from the rear side)
    • Drilling depth stop
    • Height-adjustable protective screen with micro switch providing maximum protection of the user against chips and parts flying off at high speed

    Equipment details

    Operating mode “auto”

    • The motor is starting up automatically after moving the lever
    • Stops again in the initial position
    • It is not necessary to actuate the push button start and stop repeatedly for repeated drilling tasks

    Operating mode “Threading”

    • The engine is being activated by moving the spindle sleeve lever downward
    • The direction of rotation is changed by pressing the limit switch on the adjustable drilling depth stop

    Control panel

    • Digital speed display
    • Potentiometer
    • Emergency-stop push button
    • Selector switch operating mode/rotating direction

    Powerful Brushless drive

    • New Brushless controller
    • Optimized running performance, especially smooth running
    • Higher power output (2.2 kW)
    • Signals are digitally processed
    • Nearly constant torque over the entire speed range

    Gear

    • Three stages

    Spindle speeds

    • Infinitely variable speed setting
    • Speeds from 80 up to 3’100 min-1

    Cross table

    • Massive, accurate and largely dimensioned
    • Precisely machined surface
    • Including T-slots
    • Adjustable V-ledges
    • Adjustable via 3 handwheels
    • Incorporated length measurement scale
    • Adjustable limit stops

    Spindle sleeve feed

    • Via spindle sleeve lever (drilling)
    • Coupling to switch-over from manual rough feed to manual fine feed

    Column

    • Massive dovetail guide
    • Highest stability
    • Largest possible precision

    Digital depth gauge

    • Accuracy of the display 0.01 mm
    • Reversible mm/inch

    Lamella protective cover

    • Z column
    • Stainless steel

    Optional steel base frame

    • Figure with switch combination of the optional universal coolant equipment (not included in the scope delivery)
    • Chip plates
    • Dimensions L x W x H: 550 (max. 940) x 650 x 750 mm
    • Item No 3353004

    CNC add on kit separately available

    The milling machine (frequency converter) corresponds to the standard DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare
  • OPTImill MH 50V

    Description

    • Universal precision boring milling machine with manual transmission, 12 speeds and electric Z-axis adjustment. Control unit with dirt and water resistant membrane keypad
    • Heavy, stable and solid column made of high quality gray cast iron with ground and scraped dovetail guide for high stability and precision
    • Forward / reverse
    • High concentricity due to tapered roller bearing, better than 0.015 mm measured in the quill
    • Gear head can be swiveled through 60 °
    • Manual fine feed
    • depth stop
    • Threading mode
    • Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
    • Optional solid, heavy steel base provides stability
    • Two-stage quality industrial electric motor
    • Depth selection freely adjustable via the digital display. In tapping mode, the machine automatically switches from right to left.

    Room amenities

    • Control panel functions
      • Stage selection drive motor
      • Spindle rotation
      • Drill a thread
    • control panel
      • User-friendly membrane keyboard
      • Easy to read digital display
      • clear
      • Emergency stop impact switch
    • Control Panel Rotary Pushbutton – Setting
      • Drilling depth mm / inch
      • zero
    • Manual quill feed
      • About quill lever (drilling)
      • Coupling for switching from manual coarse feed to manual fine feed
    • Tapered roller bearings
      • High concentricity ≤ 0.015 mm measured in the quill
    • Massive pillar
      • dovetail guide
      • Highest stability
      • Greatest possible precision
      • Slat protection cover made of stainless steel
    • cross table
      • Solid and large dimensions
      • Precise surface finish
      • With T-slots
      • Adjustable wedges
      • Adjustable via 3 hand wheels
      • Integrated longitudinal scale
      • Adjustable end stops
    • Mechanical quick-change clamping system
      • Milling head is equipped with a collet chuck for the BT40x45 ° pull stud
      • To change – only unlock with the mechanical safety device of the quick release system and push the quill lever upwards
    • energy chain
      • Gentle cable routing
    Read more
    Compare
  • OPTImill MH 50G

    Description

    • Universal precision boring milling machine with manual transmission, 12 speeds and electric Z-axis adjustment. Control unit with dirt and water resistant membrane keypad
    • Heavy, stable and solid column made of high quality gray cast iron with ground and scraped dovetail guide for high stability and precision
    • Forward / reverse
    • High concentricity due to tapered roller bearing, better than 0.015 mm measured in the quill
    • Gear head can be swiveled through 60 °
    • Manual fine feed
    • depth stop
    • Threading mode
    • Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
    • Optional solid, heavy steel base provides stability
    • Two-stage quality industrial electric motor
    • Depth selection freely adjustable via the digital display. In tapping mode, the machine automatically switches from right to left.

    Room amenities

    • Control panel functions
      • Stage selection drive motor
      • Spindle rotation
      • Drill a thread
    • control panel
      • User-friendly membrane keyboard
      • Easy to read digital display
      • clear
      • Emergency stop impact switch
    • Control Panel Rotary Pushbutton – Setting
      • Drilling depth mm / inch
      • zero
    • Manual quill feed
      • About quill lever (drilling)
      • Coupling for switching from manual coarse feed to manual fine feed
    • Tapered roller bearings
      • High concentricity ≤ 0.015 mm measured in the quill
    • Massive pillar
      • dovetail guide
      • Highest stability
      • Greatest possible precision
      • Slat protection cover made of stainless steel
    • cross table
      • Solid and large dimensions
      • Precise surface finish
      • With T-slots
      • Adjustable wedges
      • Adjustable via 3 hand wheels
      • Integrated longitudinal scale
      • Adjustable end stops
    • Mechanical quick-change clamping system
      • Milling head is equipped with a collet chuck for the BT40x45 ° pull stud
      • To change – only unlock with the mechanical safety device of the quick release system and push the quill lever upwards
    • energy chain
      • Gentle cable routing
    Read more
    Compare
  • OPTImill MH 35G

    description

    • Universal precision drilling-milling machine with manual transmission. Control unit with dirt and water resistant membrane keypad
    • Heavy, stable and solid column, made of high-quality gray cast iron, with ground and scraped dovetail guide, for high stability and precision
    • High concentricity due to tapered roller bearing, better than 0.015 mm measured in the quill
    • Gear head ± 60 ° swiveling
    • Manual fine feed
    • Adjustable wedges
    • Optional solid, heavy steel base provides stability
    • depth stop
    • Threading mode
    • Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
    • Two-stage quality industrial electric motor
    • Easy to read quill display in the milling head
    • Depth selection freely adjustable via the digital display. In tapping mode, the machine automatically switches from right to left.

    Room amenities

    • control panel
      • User-friendly membrane keyboard
      • Easy to read digital display
      • clear
      • Emergency stop impact switch
    • Control panel functions
      • Stage selection drive motor
      • Spindle rotation
      • Drill a thread
    •  Control Panel Rotary Pushbutton – Setting
      • Drilling depth mm / inch
      • zero
    • Mechanical quick-change clamping system
      • Milling head is equipped with a collet for the pull stud BT30x45 °
      • To change – unlock the quick release system only with the mechanical lock and push the quill lever upwards
    • Manual quill feed
      • About quill lever (drilling)
      • Coupling for switching from manual coarse feed to manual fine feed
    • Tapered roller bearings
      • High concentricity ≤ 0.015 mm measured in the quill
    • Massive pillar
      • dovetail guide
      • Highest stability
      • Greatest possible precision
      • Slat protection cover made of stainless steel
    • cross table
      • Solid and large dimensions
      • Precise surface finish
      • With T-slots
      • Adjustable wedges
      • Adjustable via 3 hand wheels
      • Integrated longitudinal scale
      • Adjustable end stops
    • energy chain
      • Gentle cable routing
    Read more
    Compare
  • OPTImill MH 25SV

    Description

    Stable milling machines with powerful, electronically infinitely variable drive.

    MH 25SV with servomotors und and digital speed display DRO 5

    • User-friendly membrane key pad
    • Counterweight eases the adjustment of the Z axis
    • Digital 3 axes position display DRO 5
    • Infinitely variable speed control
    • Easy tool change by using a rocker arm
    • Feed spindles adjustable by readjustable spindle nuts
    • All guideways are ground and sight scrapped (oil pockets for greasing)
    • Precisely manufactured
    • Angular contact bearings in the axis, can be adjusted free of play
    • Drilling-milling head slewable by ± 45°
    • Right-hand/left-hand rotation
    • Height-adjustable screening grid with micro switch
    • Stable dovetail guiding precision ground and scraped with re-adjustable V-ledges

    MH 25SV:

    • Infinitely variable feed in all axis
    • Rapid feed X-/Y-axis for rapid positioning
    • Digital speed display DRO 5

    Equipment details

    Touch panel

    • Clearly arranged and easy to operate
    • Slight contact pressure with the finger is suffi cient to activate the touch function

    Energy chain

    • Cable guide in an energy chain

    End switch

    • for all three axis

    The milling machine (frequency converter) corresponds to the standard DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare
  • OPTImill MH 25V

    Description

    Stable milling machines with powerful, electronically infinitely variable drive.

    MH 25SV with servomotors und and digital speed display DRO 5

    • User-friendly membrane key pad
    • Counterweight eases the adjustment of the Z axis
    • Digital 3 axes position display DRO 5
    • Infinitely variable speed control
    • Easy tool change by using a rocker arm
    • Feed spindles adjustable by readjustable spindle nuts
    • All guideways are ground and sight scrapped (oil pockets for greasing)
    • Precisely manufactured
    • Angular contact bearings in the axis, can be adjusted free of play
    • Drilling-milling head slewable by ± 45°
    • Right-hand/left-hand rotation
    • Height-adjustable screening grid with micro switch
    • Stable dovetail guiding precision ground and scraped with re-adjustable V-ledges

    MH 25SV:

    • Infinitely variable feed in all axis
    • Rapid feed X-/Y-axis for rapid positioning
    • Digital speed display DRO 5

    Equipment details

    Touch panel

    • Clearly arranged and easy to operate
    • Slight contact pressure with the finger is suffi cient to activate the touch function

    Energy chain

    • Cable guide in an energy chain

    End switch

    • for all three axis

    The milling machine (frequency converter) corresponds to the standard DIN EN 55011: 2011-04 class C2 – (only use in mixed and industrial areas)

    Read more
    Compare

Showing 1–15 of 19 results