Machines

Description

• Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
• Hardened and ground Z-axis guideway
• Spindle mount Camlock DIN ISO 702-2 No. 4
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Motor protection switch (TH 3309 / TH 3309D)
• DC 24 volt electrical system with two-channel safety circuit according to EN 23125
• Lockable main switch
• Right / left rotation on bed sled switchable
• leading spindle
• Machine base with tool compartment on the right side
• Safety handwheels with release function in the X and Z axis
• Emergency stop device with foot control

TH 3309D / TH 3309V

• Digital position indicator DPA 21
• User-friendly membrane keypad, splash-proof, closed and glare-free
• Significant reduction in production times
• Higher work accuracy
• Error rate is reduced
• X, Z0, Z axis with 8-digit display each
• Clearly arranged keyboard
• glass scales

TH 3309V: Powerful brushless drive

• Especially quiet running
• Approximately constant torque over the entire speed range
• High power output

switch cabinet

• 24 volt DC power supply
• All contactors and relays from Siemens or Schneider – TH 3309V from Eaton

Room amenities:

main spindle

• Running in oil bath
• Gear wheels smooth, hardened and ground

sled

• Precisely worked
• Handwheels with adjustable fine scale 0.04 / 0.02 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Adjustment range upper slide ± 90 °

prism bed

• Heavily ribbed
• Induction hardened
• precision ground

tailstock

• For taper turning ± 10 mm adjustable
• Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

LED machine light

• Integrated in chip protection

substructure

• No toolboxes on the left, only panels

tool compartment

Right-left switch

• two channels
• tested according to EN 23125

hand wheels

• decoupled
• tested according to EN 23125

switch

• with life cycle calculation
• tested according to EN ISO 13849

chip pan

• extractable
• guide rails

Lathe chuck protection

• tested according to EN 23125

Description

• Fully equipped mechanic lathes. Convincing in precision and performance. TH 4010D with digital position indicator DPA 21, TH 4010V additionally with Siemens inverter vario drive
• Hardened and ground Z-axis guideway
• Spindle mount Camlock DIN ISO 702-2 No. 5
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Gears and shafts hardened and ground, 
  running in an oil bath in precision bearings
• Motor protection switch (TH 4010 / TH 4010D)
• DC 24 Volt – electrics
• Lockable main switch
• Right / left rotation on bed sled switchable
• Safety handwheels with release function in the X and Z axis
• Emergency stop device with foot control

TH 4010D / TH 4010V:

• Digital position indicator DPA21
  • User-friendly membrane keypad, splash-proof, closed and glare-free
  • Higher work accuracy
  • Error rate is reduced
  • X, Z0, Z axis with 8-digit display each
  • glass scales

TH 4010V:

• Siemens Sinamics Frequency Inverter / Safety Integrated
• Quick-change steel holder 3-E
• Steel holder 20 x 100 type D for square chisels

Room amenities:

switch cabinet

• 24 volt DC power supply
• All contactors and relays from Siemens or Schneider – TH 4010V from Eaton

main spindle

• Running in oil bath
• Gear wheels smooth, hardened and ground

sled

• Precisely worked
• Handwheels with adjustable fine scale 0.04 / 0.02 mm
• All guides can be adjusted by wedge strips
• Adjustment range upper slide ± 90 °

LED machine light

• integrated in the chip protection

Coolant system

prism bed

• Heavily ribbed
• cast iron
• Induction hardened and precision ground

tailstock

• For taper turning ± 10 mm adjustable
• Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

substructure

• Without tool trays, only screens

chip pan

• extractable
• guide rails

Note:

The Vario lathes comply with the standard DIN EN 55011: Class A.

Description

• The new compact lathe with electronically adjustable speed
• DC motor
• Ribbed prism bed made of grey cast iron, inductively hardened and ground
• Hardened and ground bed guideways
• Guaranteed true running accuracy of the spindle nose better than 0.015 mm
• True running accuracy – Lathe chuck max 0.05 mm
• With leading spindle for threading or automatic longitudinal turning
• With longitudinal slide, cross slide and top slide
• Automatic longitudinal/leading spindle drive
• Wide range of threading due to change gear kit
• Simple and rapid speed change via V-belt
• Safety switch in covering
• Right-/left-handed rotation switchable on
• Drill chuck protection with micro switch the control panel
• Handwheels with adjustable precision scaling of 0.04/0.01 mm
• Double tool holder
• All guideways adjustable via V-ledges free of play
• Emergency stop push button
• Low power electronics
• EMC filter, class B (used in households)
• Comprehensive accessory

New: with greater centre height/ width

Description

Description

• Lathe for the demanding do-it-yourselfer
• Precise manufacturing
• Hardened and ground bed guideways
• Guaranteed true running accuracy of the spindle nose better than 0.009 mm
• True running accuracy – Lathe chuck better than 0.05 mm
• With leading spindle for threading or automatic longitudinal turning
• Right-/left-handed rotation switchable on
• Rolled trapezoid spindles
• Emergency-stop push button
• Comprehensive accessory
• Stable value

TU 2406 V

• With electronically infinitely variable drive
• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter, class B (used in households)

Features:

Slide

• Precisely worked
• Handwheels with adjustable precision scaling of 0.04/0.01 mm
• Quadruplicate tool holder
• All guidings adjustable via V-ledges

Tailstock

• Adjustable by ± 5 mm for taper turning
• Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

Change gear kit

• For threading

Taper roller bearing

• Two pieces
• Of P5 quality

Lead screw

• Run on two porous bearings

Prism bed

• Solid and aged made of grey cast iron
• Matured at least for six months
• Inductively hardened (HRC 42-52)
• Precision ground

Thrust bearing