Lathes Vario and conventional

View as:
  • OPTIturn TH 3309

    Description

    • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 4
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Motor protection switch (TH 3309 / TH 3309D)
    • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool compartment on the right side
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 3309D / TH 3309V

    • Digital position indicator DPA 21
    • User-friendly membrane keypad, splash-proof, closed and glare-free
    • Significant reduction in production times
    • Higher work accuracy
    • Error rate is reduced
    • X, Z0, Z axis with 8-digit display each
    • Clearly arranged keyboard
    • glass scales

    TH 3309V: Powerful brushless drive

    • Especially quiet running
    • Approximately constant torque over the entire speed range
    • High power output

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 3309V from Eaton

    Room amenities:

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    prism bed

    • Heavily ribbed
    • Induction hardened
    • precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    LED machine light

    • Integrated in chip protection

    substructure

    • No toolboxes on the left, only panels

    tool compartment

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    chip pan

    • extractable
    • guide rails

    Lathe chuck protection

    • tested according to EN 23125
    Read more
    Compare
  • OPTIturn TH 3309D

    Description

    • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 4
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Motor protection switch (TH 3309 / TH 3309D)
    • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool compartment on the right side
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 3309D / TH 3309V

    • Digital position indicator DPA 21
    • User-friendly membrane keypad, splash-proof, closed and glare-free
    • Significant reduction in production times
    • Higher work accuracy
    • Error rate is reduced
    • X, Z0, Z axis with 8-digit display each
    • Clearly arranged keyboard
    • glass scales

    TH 3309V: Powerful brushless drive

    • Especially quiet running
    • Approximately constant torque over the entire speed range
    • High power output

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 3309V from Eaton

    Room amenities:

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    prism bed

    • Heavily ribbed
    • Induction hardened
    • precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    LED machine light

    • Integrated in chip protection

    substructure

    • No toolboxes on the left, only panels

    tool compartment

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    chip pan

    • extractable
    • guide rails

    Lathe chuck protection

    • tested according to EN 23125
    Read more
    Compare
  • OPTIturn TH 3309V

    Description

    • Fully equipped guide and traction spindle lathes. TH 3309D with digital position indicator DPA 21, TH 3309V with brushless motor for stepless speed control and digital position indicator DPA 21.
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 4
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Motor protection switch (TH 3309 / TH 3309D)
    • DC 24 volt electrical system with two-channel safety circuit according to EN 23125
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool compartment on the right side
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 3309D / TH 3309V

    • Digital position indicator DPA 21
    • User-friendly membrane keypad, splash-proof, closed and glare-free
    • Significant reduction in production times
    • Higher work accuracy
    • Error rate is reduced
    • X, Z0, Z axis with 8-digit display each
    • Clearly arranged keyboard
    • glass scales

    TH 3309V: Powerful brushless drive

    • Especially quiet running
    • Approximately constant torque over the entire speed range
    • High power output

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 3309V from Eaton

    Room amenities:

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    prism bed

    • Heavily ribbed
    • Induction hardened
    • precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    LED machine light

    • Integrated in chip protection

    substructure

    • No toolboxes on the left, only panels

    tool compartment

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    chip pan

    • extractable
    • guide rails

    Lathe chuck protection

    • tested according to EN 23125
    Read more
    Compare
  • OPTIturn TH 3610

    Description

    • Fully equipped mechanic lathes. TH 3610D with digital position indicator DPA 21
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 5
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Gears and shafts hardened and ground,
      running in an oil bath in precision bearings
    • Motor protection switch, lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool pockets
    • Emergency stop device with foot control
    • Safety handwheels with release function in the X and Z axis

    TH 3610D:

    • Digital position indicator DPA 21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • glass scales

    Room amenities:

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider

    main spindle

    • Running in oil bath
    • Gear wheels smooth,
      hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale
      0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    LED machine light

    • integrated in the chip protection

    prism bed

    • Heavily ribbed
    • cast iron
    • Induction hardened and precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    substructure

    • Tool compartments on both sides

    chip pan

    • extractable
    • guide rails

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125
    Read more
    Compare
  • OPTIturn TH 3610D

    Description

    • Fully equipped mechanic lathes. TH 3610D with digital position indicator DPA 21
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 5
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Gears and shafts hardened and ground, 
      running in an oil bath in precision bearings
    • Motor protection switch, lockable main switch
    • Right / left rotation on bed sled switchable
    • leading spindle
    • Machine base with tool pockets
    • Emergency stop device with foot control
    • Safety handwheels with release function in the X and Z axis

    TH 3610D:

    • Digital position indicator DPA 21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • glass scales

    Room amenities:

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider

    main spindle

    • Running in oil bath
    • Gear wheels smooth, 
      hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 
      0.04 / 0.02 mm
    • Quadruple tool holder
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    LED machine light

    • integrated in the chip protection

    prism bed

    • Heavily ribbed
    • cast iron
    • Induction hardened and precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    substructure

    • Tool compartments on both sides

    chip pan

    • extractable
    • guide rails

    switch

    • with life cycle calculation
    • tested according to EN ISO 13849

    Right-left switch

    • two channels
    • tested according to EN 23125

    hand wheels

    • decoupled
    • tested according to EN 23125
    Read more
    Compare
  • OPTIturn TH 4010

    Description

    • Fully equipped mechanic lathes. Convincing in precision and performance. TH 4010D with digital position indicator DPA 21, TH 4010V additionally with Siemens inverter vario drive
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 5
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Gears and shafts hardened and ground, 
      running in an oil bath in precision bearings
    • Motor protection switch (TH 4010 / TH 4010D)
    • DC 24 Volt – electrics
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 4010D / TH 4010V:

    • Digital position indicator DPA21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • glass scales

    TH 4010V:

    • Siemens Sinamics Frequency Inverter / Safety Integrated
    • Quick-change steel holder 3-E
    • Steel holder 20 x 100 type D for square chisels

    Room amenities:

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 4010V from Eaton

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    LED machine light

    • integrated in the chip protection

    Coolant system

    prism bed

    • Heavily ribbed
    • cast iron
    • Induction hardened and precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    substructure

    • Without tool trays, only screens

    chip pan

    • extractable
    • guide rails

    Note:

    The Vario lathes comply with the standard DIN EN 55011: Class A.

    Read more
    Compare
  • OPTIturn TH 4010D

    Description

    • Fully equipped mechanic lathes. Convincing in precision and performance. TH 4010D with digital position indicator DPA 21, TH 4010V additionally with Siemens inverter vario drive
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 5
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Gears and shafts hardened and ground, 
      running in an oil bath in precision bearings
    • Motor protection switch (TH 4010 / TH 4010D)
    • DC 24 Volt – electrics
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 4010D / TH 4010V:

    • Digital position indicator DPA21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • glass scales

    TH 4010V:

    • Siemens Sinamics Frequency Inverter / Safety Integrated
    • Quick-change steel holder 3-E
    • Steel holder 20 x 100 type D for square chisels

    Room amenities:

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 4010V from Eaton

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    LED machine light

    • integrated in the chip protection

    Coolant system

    prism bed

    • Heavily ribbed
    • cast iron
    • Induction hardened and precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    substructure

    • Without tool trays, only screens

    chip pan

    • extractable
    • guide rails

    Note:

    The Vario lathes comply with the standard DIN EN 55011: Class A.

    Read more
    Compare
  • OPTIturn TH 4010V

    Description

    • Fully equipped mechanic lathes. Convincing in precision and performance. TH 4010D with digital position indicator DPA 21, TH 4010V additionally with Siemens inverter vario drive
    • Hardened and ground Z-axis guideway
    • Spindle mount Camlock DIN ISO 702-2 No. 5
    • Guaranteed concentricity of the spindle nose better than 0.015 mm
    • Gears and shafts hardened and ground, 
      running in an oil bath in precision bearings
    • Motor protection switch (TH 4010 / TH 4010D)
    • DC 24 Volt – electrics
    • Lockable main switch
    • Right / left rotation on bed sled switchable
    • Safety handwheels with release function in the X and Z axis
    • Emergency stop device with foot control

    TH 4010D / TH 4010V:

    • Digital position indicator DPA21
      • User-friendly membrane keypad, splash-proof, closed and glare-free
      • Higher work accuracy
      • Error rate is reduced
      • X, Z0, Z axis with 8-digit display each
      • glass scales

    TH 4010V:

    • Siemens Sinamics Frequency Inverter / Safety Integrated
    • Quick-change steel holder 3-E
    • Steel holder 20 x 100 type D for square chisels

    Room amenities:

    switch cabinet

    • 24 volt DC power supply
    • All contactors and relays from Siemens or Schneider – TH 4010V from Eaton

    main spindle

    • Running in oil bath
    • Gear wheels smooth, hardened and ground

    sled

    • Precisely worked
    • Handwheels with adjustable fine scale 0.04 / 0.02 mm
    • All guides can be adjusted by wedge strips
    • Adjustment range upper slide ± 90 °

    LED machine light

    • integrated in the chip protection

    Coolant system

    prism bed

    • Heavily ribbed
    • cast iron
    • Induction hardened and precision ground

    tailstock

    • For taper turning ± 10 mm adjustable
    • Tailstock sleeve and hand wheel with adjustable fine scale 0.025 mm

    substructure

    • Without tool trays, only screens

    chip pan

    • extractable
    • guide rails

    Note:

    The Vario lathes comply with the standard DIN EN 55011: Class A.

    Read more
    Compare
  • OPTIturn TU 1503V

    Description

    • The new compact lathe with electronically adjustable speed
    • DC motor
    • Ribbed prism bed made of grey cast iron, inductively hardened and ground
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.015 mm
    • True running accuracy – Lathe chuck max 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • With longitudinal slide, cross slide and top slide
    • Automatic longitudinal/leading spindle drive
    • Wide range of threading due to change gear kit
    • Simple and rapid speed change via V-belt
    • Safety switch in covering
    • Right-/left-handed rotation switchable on
    • Drill chuck protection with micro switch the control panel
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Double tool holder
    • All guideways adjustable via V-ledges free of play
    • Emergency stop push button
    • Low power electronics
    • EMC filter, class B (used in households)
    • Comprehensive accessory

    New: with greater centre height/ width

    Read more
    Compare
  • OPTIturn TU 2004V

    Description

    • Lathe with infinitely variable speed control and digital speed
    • Precise manufacturing
    • Heavily ribbed prism bed made of steel casting, inductively hardened
      and precision ground
    • Hardened and ground bed guideways
    • Hardened spindle nose (DIN 6350)
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • Automatic longitudinal/leading spindle drive
    • With longitudinal slide, cross slide and top slide
    • Right-/left-handed rotation switchable on
    • Emergency-stop push button
    • Lathe chuck protection
    • Thrust bearing
    • Leading spindle run on two porous bearings
    • Large threading range due to set of change gears
    • Change gear train
    • EMC filter, class B (used in households)

    Features:

    Digital speed display

    • Easy to read digital speed display

    Chip protection

    • at the top slide

    Quadruplicate tool holder

    • turnable

    Rolled trapezoid thread

    • Lead screw

    Tailstock

    • Adjustable for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Main spindle

    • Hardened and with re-adjustable accurate tapper roller bearings
    • Taper roller bearing of P5 quality
    • Cylindrical centring consumption
    • H ardened spindle nose with a Ø 21 mm spindle hole

    Lathe chuck

    • True running accuracy 0.04 mm
    Read more
    Compare
  • OPTIturn TU 2304

    Description

    • Lathe for the demanding do-it-yourselfer
    • Precise manufacturing
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • True running accuracy – Lathe chuck better than 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • Right-/left-handed rotation switchable on
    • Rolled trapezoid spindles
    • Emergency-stop push button
    • Comprehensive accessory
    • Stable value

    TU 2304 V

    • Powerful motor and mostly constant torque delivery
    • Speed change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter, class B (used in households)

    Features:

    Change gear kit

    • for threading

    Taper roller bearing

    • Two pieces
    • Of P5 quality

    Lead screw

    • run on two porous bearings

    Prism bed

    • Solid and aged made of grey cast iron
    • Matured at least for six months
    • Inductively hardened (HRC 42-52)
    • Precision ground

    Slide

    • Precisely worked
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Quadruplicate tool holder
    • All guidings adjustable via V-ledges

    Tailstock

    • Adjustable by ± 5 mm for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Thrust bearing

    Read more
    Compare
  • OPTIturn TU 2304V

    Description

    • Lathe for the demanding do-it-yourselfer
    • Precise manufacturing
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • True running accuracy – Lathe chuck better than 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • Right-/left-handed rotation switchable on
    • Rolled trapezoid spindles
    • Emergency-stop push button
    • Comprehensive accessory
    • Stable value

    TU 2304 V

    • Powerful motor and mostly constant torque delivery
    • Speed change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter, class B (used in households)

    Features:

    Change gear kit

    • for threading

    Taper roller bearing

    • Two pieces
    • Of P5 quality

    Lead screw

    • run on two porous bearings

    Prism bed

    • Solid and aged made of grey cast iron
    • Matured at least for six months
    • Inductively hardened (HRC 42-52)
    • Precision ground

    Slide

    • Precisely worked
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Quadruplicate tool holder
    • All guidings adjustable via V-ledges

    Tailstock

    • Adjustable by ± 5 mm for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Thrust bearing

    Read more
    Compare
  • OPTIturn TU 2406 – 230 V

    Description

    • Lathe for the demanding do-it-yourselfer
    • Precise manufacturing
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • True running accuracy – Lathe chuck better than 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • Right-/left-handed rotation switchable on
    • Rolled trapezoid spindles
    • Emergency-stop push button
    • Comprehensive accessory
    • Stable value

    TU 2406 V

    • With electronically infinitely variable drive
    • Speed change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter, class B (used in households)

    Features:

    Slide

    • Precisely worked
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Quadruplicate tool holder
    • All guidings adjustable via V-ledges

    Tailstock

    • Adjustable by ± 5 mm for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Change gear kit

    • For threading

    Taper roller bearing

    • Two pieces
    • Of P5 quality

    Lead screw

    • Run on two porous bearings

    Prism bed

    • Solid and aged made of grey cast iron
    • Matured at least for six months
    • Inductively hardened (HRC 42-52)
    • Precision ground

    Thrust bearing

    Read more
    Compare
  • OPTIturn TU 2406 – 400V

    Description

    • Lathe for the demanding do-it-yourselfer
    • Precise manufacturing
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • True running accuracy – Lathe chuck better than 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • Right-/left-handed rotation switchable on
    • Rolled trapezoid spindles
    • Emergency-stop push button
    • Comprehensive accessory
    • Stable value

    TU 2406 V

    • With electronically infinitely variable drive
    • Speed change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter, class B (used in households)

    Features:

    Slide

    • Precisely worked
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Quadruplicate tool holder
    • All guidings adjustable via V-ledges

    Tailstock

    • Adjustable by ± 5 mm for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Change gear kit

    • For threading

    Taper roller bearing

    • Two pieces
    • Of P5 quality

    Lead screw

    • Run on two porous bearings

    Prism bed

    • Solid and aged made of grey cast iron
    • Matured at least for six months
    • Inductively hardened (HRC 42-52)
    • Precision ground

    Thrust bearing

    Read more
    Compare
  • OPTIturn TU 2406V

    Description

    • Lathe for the demanding do-it-yourselfer
    • Precise manufacturing
    • Hardened and ground bed guideways
    • Guaranteed true running accuracy of the spindle nose better than 0.009 mm
    • True running accuracy – Lathe chuck better than 0.05 mm
    • With leading spindle for threading or automatic longitudinal turning
    • Right-/left-handed rotation switchable on
    • Rolled trapezoid spindles
    • Emergency-stop push button
    • Comprehensive accessory
    • Stable value

    TU 2406 V

    • With electronically infinitely variable drive
    • Speed change easily adjustable via potentiometer
    • Digital speed display
    • EMC filter, class B (used in households)

    Features:

    Slide

    • Precisely worked
    • Handwheels with adjustable precision scaling of 0.04/0.01 mm
    • Quadruplicate tool holder
    • All guidings adjustable via V-ledges

    Tailstock

    • Adjustable by ± 5 mm for taper turning
    • Tailstock spindle sleeve and handwheel with adjustable precision scaling of 0.02 mm

    Change gear kit

    • For threading

    Taper roller bearing

    • Two pieces
    • Of P5 quality

    Lead screw

    • Run on two porous bearings

    Prism bed

    • Solid and aged made of grey cast iron
    • Matured at least for six months
    • Inductively hardened (HRC 42-52)
    • Precision ground

    Thrust bearing

    Read more
    Compare

Showing 1–15 of 17 results