OPTI D 560x1500


  • Camlock spindle holding fixture ASA D 1 - 6"
  • Hardened and ground oil-quenched work spindle with 3 adjustable precision taper roller bearings
  • Guaranteed concentricity precision of the spindle nose less than 0.015 mm
  • Closed fast-acting and oil-quenched feedgear mechanism with precision bearings. All gearwheels and shafts are hardened and ground
  • Substructure and lathe bed made of a single block of Meehanite cast iron
  • Hardened and ground bed slideways
  • Central lubrication system in the tool slide
  • Stop rod with four stop pins for longitudinal movement of the saddle
  • Tailstock adjustable for taper turning
  • EMERGENCY-STOP button, protective motor switch, lockable main switch
  • Right-left-hand rotation can be switched with the help of the indexing spindle
  • Machine lamp
  • Cover for leading spindle
  • Removable bed gap
  • Mechanical foot spindle brake
  • Manufactured according to DIN 8606 (toolmaker's precision)


I'm Interested
Back to Lathes

Technical Data

model D 560 x 1500-DPA D 560 x 2000-DPA D 560 x 3000-DPA
Item no. 340 2615 DPA-C 340 2620 DPA-C 340 2630 DPA-C
EUR excl. VAT 15.900,00 17.900,00 20.900,00
Technical data
Centre height 280 mm 280 mm 280 mm
Center width 1,500 mm 2,000 mm 3,000 mm
Turning Ø via lathe bed 560 mm 560 mm 560 mm
Turning Ø via slide 355 mm 355 mm 355 mm
Turning Ø without bed bridge 790 mm 790 mm 790 mm
Length of bed bridge 270 mm 270 mm 270 mm
Spindle hole 80 mm 80 mm 80 mm
Spindle holding fixture Camlock ASA D 1-8” Camlock ASA D 1-8” Camlock ASA D 1-8”
Spindle taper MT 7 MT 7 MT 7
Spindle speeds, 12 steps 25 - 1,600 rpm 25 - 1,600 rpm 25 - 1,600 rpm
Pitch - Metric (47) 0.2 - 14 mm/rev 0.2 - 14 mm/rev 0.2 - 14 mm/rev
Pitch - Inch (60) 112 - 2 threads/1“ 112 - 2 threads/1“ 112 - 2 threads/1“
Longitudinal feed (35) 0.059 - 1.646 mm/rev 0.059 - 1.646 mm/rev 0.059 - 1.646 mm/rev
Crossfeed (35) 0.020 - 0.573 mm/rev 0.020 - 0.573 mm/rev 0.020 - 0.573 mm/rev
Top slide - travel 130 mm 130 mm 130 mm
Compound slide - travel 316 mm 316 mm 316 mm
Tailstock taper MT 5 MT 5 MT 5
Tailstock sleeve travel 180 mm 180 mm 180 mm
Motor power 400 V ~50 Hz 7.5 kW 7.5 kW 7.5 kW
Dimension mm (L x B x H) 2,840 x 1,150 x 1,460 3,340 x 1,150 x 1,460 4,340 x 1,150 x 1,460
Net weight 2,302 kg 2,720 kg 3,000 kg
Extent of supply OPTI D 560 X 1500-DPA / D 560 X 2000-DPA / D 560 X 3000-DPA Item no. EUR excl. VAT

3-jaw chuck Ø 315 mm

Camlock D 1-8"

 344 4055 539,00

Soft block jaws for 3-jaw chuck

Ø 315 mm

 344 4056 149,00

4-jaw chuck Ø 400 mm D 1-8"

 344 4051 359,00

4-jaw chuck Ø 325 mm Kombi

 344 4052 839,00

Lathe chuck flange Ø 315 mm 

Camlock D 1-8"

 344 4042 159,00

Revolving centre MT 5

 344 0705 79,00

Cutting tool kit HM 20 mm

7 pcs

 344 4011 185,00

Quick-action tool holder kit

SWH 7 - C

 

 338 4307 899,00

Factory assembly and adaptation SWH

 900 0400 95,00